Index

_

__eq__() (Halfedge method) (Site method) __extent (SiteList attribute) __iter__() (SiteList method) (SiteList.Iterator method) __len__() (PriorityQueue method) (SiteList method) __lt__() (Halfedge method) (Site method) __sitenum (SiteList attribute) __sites (SiteList attribute) __str__() (Layer method) (Segment method) __version__ (in module cam.version) __xmax (SiteList attribute) __xmin (SiteList attribute)

__ymax (SiteList attribute) __ymin (SiteList attribute) _backup_render_settings() (in module cam.utilities.image_utils) _calc_path() (in module cam.operators.path_ops) _getextent() (SiteList method) _getxmax() (SiteList method) _getxmin() (SiteList method) _getymax() (SiteList method) _getymin() (SiteList method) _internal_x_y_distance_to() (in module cam.utilities.chunk_utils) _is_cancelled (AsyncOperatorMixin attribute) _IS_LOADING_DEFAULTS (in module cam.constants) _offset_inner_loop() (in module cam.utilities.image_utils) _optimize_internal() (in module cam.utilities.chunk_utils) _PREVIOUS_OCL_MESH (in module cam.constants) _restore_render_settings() (in module cam.utilities.image_utils)

A

a (Edge attribute), [1] a_along_x (CAM_OPERATION_Properties attribute), [1] activate() (in module cam.utilities.simple_utils) active_name() (in module cam.utilities.simple_utils) active_operation (CAM_CHAIN_Properties attribute), [1] active_to_coords() (in module cam.utilities.simple_utils) active_to_shapely_poly() (in module cam.utilities.simple_utils) adapt_distance() (CamPathChunk method) adaptive (CamCurveMortise attribute), [1] add_auto_bridges() (in module cam.bridges) add_bound_rectangle() (in module cam.utilities.simple_utils) add_bridge() (in module cam.bridges) add_correction() (in module cam.bas_relief) add_loop() (in module cam.utilities.loop_utils) add_machine_area_object() (in module cam.utilities.machine_utils) add_material_area_object() (in module cam.utilities.material_utils) add_mesh_for_medial (CAM_OPERATION_Properties attribute), [1] add_orientation_object() (in module cam.utilities.orient_utils) add_overcut() (in module cam.utilities.simple_utils) add_pocket() (in module cam.strategy) add_pocket_for_medial (CAM_OPERATION_Properties attribute), [1] add_rectangle() (in module cam.utilities.simple_utils) add_segment() (GcodeModel method) add_to_group() (in module cam.utilities.simple_utils) add_transparent_material() (in module cam.utilities.material_utils) addon_dependencies() (in module cam.utilities.addon_utils) AddPresetCamCutter (class in cam.operators) (class in cam.operators.preset_ops) AddPresetCamMachine (class in cam.operators) (class in cam.operators.preset_ops) AddPresetCamOperation (class in cam.operators) (class in cam.operators.preset_ops) addTestCurve() (in module cam.testing) addTestMesh() (in module cam.testing) advanced (DoBasRelief attribute), [1]

align (CamOffsetSilhouete attribute), [1] ambient (CAM_OPERATION_Properties attribute), [1] ambient_behaviour (CAM_OPERATION_Properties attribute), [1] ambient_cutter_restrict (CAM_OPERATION_Properties attribute), [1] ambient_radius (CAM_OPERATION_Properties attribute), [1] amplitude (CamSineCurve attribute), [1] amplitude_a (CamLissajousCurve attribute), [1] amplitude_b (CamLissajousCurve attribute), [1] amplitude_z (CamLissajousCurve attribute), [1] angle (CamCurveHatch attribute), [1] (CamCurvePuzzle attribute), [1] angle() (in module cam.joinery) angle_difference() (in module cam.joinery) angleb (CamCurvePuzzle attribute), [1] append() (CamPathChunk method) apply_stroke() (in module cam.utilities.image_utils) arc() (in module cam.puzzle_joinery) arc_bar() (in module cam.puzzle_joinery) arc_bar_arc() (in module cam.puzzle_joinery) array (CAM_OPERATION_Properties attribute), [1] array_x_count (CAM_OPERATION_Properties attribute), [1] array_x_distance (CAM_OPERATION_Properties attribute), [1] array_y_count (CAM_OPERATION_Properties attribute), [1] array_y_distance (CAM_OPERATION_Properties attribute), [1] asolve() (in module cam.bas_relief) AsyncCancelledException AsyncOperatorMixin (class in cam.operators.async_op) AsyncTestOperator (class in cam.operators.async_op) atimes() (in module cam.bas_relief) attenuation (DoBasRelief attribute), [1] auto_cut_bridge() (in module cam.bridges) auto_export (CAM_OPERATION_Properties attribute), [1] axis (CamSineCurve attribute), [1] axis_4 (CAM_MACHINE_Properties attribute), [1] axis_5 (CAM_MACHINE_Properties attribute), [1]

B

b (Edge attribute), [1] backlash (CamCurveGear attribute), [1] backlight (CamCurveIntarsion attribute), [1] backlight_depth_from_top (CamCurveIntarsion attribute), [1] ball_radius (CAM_OPERATION_Properties attribute), [1] bar() (in module cam.puzzle_joinery) base_gender (CamCurvePuzzle attribute), [1] base_thickness (CamCurveIntarsion attribute), [1] beat_period (CamSineCurve attribute), [1] BIG_FLOAT (in module cam.constants) bisect() (Edge static method) bit_diameter (DoBasRelief attribute), [1] bl_idname (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamAddonPreferences attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (FABEX_ENGINE attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] (WM_OT_gcode_import attribute), [1] bl_label (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (FABEX_ENGINE attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] (WM_OT_gcode_import attribute), [1]

bl_options (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] bl_use_eevee_viewport (FABEX_ENGINE attribute), [1] block_number_increment (CAM_MACHINE_Properties attribute), [1] boolean_type (CamCurveBoolean attribute), [1] borderwidth (CAM_OPERATION_Properties attribute), [1] break_path_for_leadin_leadout() (CamPathChunk method) bridges_collection_name (CAM_OPERATION_Properties attribute), [1] bridges_height (CAM_OPERATION_Properties attribute), [1] bridges_width (CAM_OPERATION_Properties attribute), [1] build_mesh() (in module cam.bas_relief) build_stroke() (in module cam.utilities.image_utils) bull_corner_radius (CAM_OPERATION_Properties attribute), [1] BULLET_SCALE (in module cam.constants)

C

c (Edge attribute), [1] calculate_defect() (in module cam.bas_relief) CalculatePath (class in cam.operators) (class in cam.operators.path_ops) cam module cam.bas_relief module cam.bridges module cam.cam_chunk module cam.collision module cam.constants module cam.engine module cam.exception module cam.gcode_import_parser module cam.gcode_path module cam.involute_gear module cam.joinery module cam.operators module cam.operators.async_op module cam.operators.bas_relief_ops module cam.operators.bridges_op module cam.operators.chain_ops module cam.operators.curve_create_ops module cam.operators.curve_equation_ops module cam.operators.curve_tools_ops module cam.operators.gcode_import_op module cam.operators.operation_ops module cam.operators.orient_op module cam.operators.pack_op module cam.operators.path_ops module cam.operators.position_op module cam.operators.preset_ops module cam.operators.simulation_ops module cam.operators.slice_op module cam.pack module cam.parametric module cam.pattern module cam.preferences module cam.properties module cam.properties.chain_props module cam.properties.info_props module cam.properties.interface_props module cam.properties.machine_props module cam.properties.material_props module cam.properties.movement_props module cam.properties.operation_props module cam.properties.optimisation_props module cam.puzzle_joinery module cam.simulation module cam.slice module cam.strategy module cam.testing module cam.utilities module cam.utilities.addon_utils module cam.utilities.async_utils module cam.utilities.bounds_utils module cam.utilities.chunk_utils module cam.utilities.compare_utils module cam.utilities.dict_utils module cam.utilities.geom_utils module cam.utilities.image_utils module cam.utilities.index_utils module cam.utilities.loop_utils module cam.utilities.machine_utils module cam.utilities.material_utils module cam.utilities.numba_utils module cam.utilities.ocl_utils module cam.utilities.operation_utils module cam.utilities.orient_utils module cam.utilities.shapely_utils module cam.utilities.simple_utils module cam.utilities.strategy_utils module cam.utilities.thread_utils module cam.utilities.version_utils module cam.version module cam.voronoi module CAM_CHAIN_Properties (class in cam.properties) (class in cam.properties.chain_props) CAM_INFO_Properties (class in cam.properties) (class in cam.properties.info_props) CAM_INTERFACE_Properties (class in cam.properties) (class in cam.properties.interface_props) CAM_MACHINE_Properties (class in cam.properties) (class in cam.properties.machine_props) CAM_MATERIAL_PositionObject (class in cam.operators) (class in cam.operators.position_op) CAM_MATERIAL_Properties (class in cam.properties) (class in cam.properties.material_props) CAM_MOVEMENT_Properties (class in cam.properties) (class in cam.properties.movement_props) CAM_OP_REFERENCE_Properties (class in cam.properties) (class in cam.properties.chain_props) CAM_OPERATION_Properties (class in cam) (class in cam.properties.operation_props) CAM_OPTIMISATION_Properties (class in cam.properties) (class in cam.properties.optimisation_props) CamAddonPreferences (class in cam) (class in cam.preferences) CamBridgesAdd (class in cam.operators) (class in cam.operators.bridges_op)

CamChainAdd (class in cam.operators) (class in cam.operators.chain_ops) CamChainOperationAdd (class in cam.operators) (class in cam.operators.chain_ops) CamChainOperationDown (class in cam.operators) (class in cam.operators.chain_ops) CamChainOperationRemove (class in cam.operators) (class in cam.operators.chain_ops) CamChainOperationUp (class in cam.operators) (class in cam.operators.chain_ops) CamChainRemove (class in cam.operators) (class in cam.operators.chain_ops) CamCurveBoneFilletOvercuts (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCurveBoolean (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCurveConvexHull (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCurveDrawer (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveFlatCone (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveGear (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveHatch (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveIntarsion (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCurveInterlock (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveMortise (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurvePlate (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurvePuzzle (class in cam.operators) (class in cam.operators.curve_create_ops) CamCurveRemoveDoubles (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCurveSimpleOvercuts (class in cam.operators) (class in cam.operators.curve_tools_ops) CamCustomCurve (class in cam.operators) (class in cam.operators.curve_equation_ops) CamException CamHypotrochoidCurve (class in cam.operators) (class in cam.operators.curve_equation_ops) CamLissajousCurve (class in cam.operators) (class in cam.operators.curve_equation_ops) CamMeshGetPockets (class in cam.operators) (class in cam.operators.curve_tools_ops) CamObjectSilhouette (class in cam.operators) (class in cam.operators.curve_tools_ops) CamOffsetSilhouete (class in cam.operators) (class in cam.operators.curve_tools_ops) CamOperationAdd (class in cam.operators) (class in cam.operators.operation_ops) CamOperationCopy (class in cam.operators) (class in cam.operators.operation_ops) CamOperationMove (class in cam.operators) (class in cam.operators.operation_ops) CamOperationRemove (class in cam.operators) (class in cam.operators.operation_ops) CamOrientationAdd (class in cam.operators) (class in cam.operators.orient_op) CamPackObjects (class in cam.operators) (class in cam.operators.pack_op) CamPathChunk (class in cam.cam_chunk) CamPathChunkBuilder (class in cam.cam_chunk) CAMSimulate (class in cam.operators) (class in cam.operators.simulation_ops) CAMSimulateChain (class in cam.operators) (class in cam.operators.simulation_ops) CamSineCurve (class in cam.operators) (class in cam.operators.curve_equation_ops) CamSliceObjects (class in cam.operators) (class in cam.operators.slice_op) caps (CamOffsetSilhouete attribute), [1] carve_depth (CAM_OPERATION_Properties attribute), [1] center_x (CAM_MATERIAL_Properties attribute), [1] center_y (CAM_MATERIAL_Properties attribute), [1] chain_valid() (in module cam.utilities.operation_utils) change_data (CAM_OPERATION_Properties attribute), [1] change_path_start() (CamPathChunk method) changed (CAM_OPERATION_Properties attribute), [1] check_equal() (in module cam.utilities.compare_utils) check_memory_limit() (in module cam.gcode_path) check_min_z() (in module cam.strategy) children (CamPathChunk attribute) chipload (CAM_INFO_Properties attribute), [1] chipload_per_tooth (CAM_INFO_Properties attribute), [1] CHIPLOAD_PRECISION (in module cam.constants) chunk_to_shapely() (in module cam.utilities.chunk_utils) chunkPointSamplesFromOCL() (in module cam.utilities.ocl_utils) chunkPointsResampleFromOCL() (in module cam.utilities.ocl_utils) chunks_coherency() (in module cam.cam_chunk) chunks_refine() (in module cam.utilities.chunk_utils) chunks_refine_threshold() (in module cam.utilities.chunk_utils) chunks_to_mesh() (in module cam.strategy) chunks_to_shapely() (in module cam.utilities.chunk_utils) circle() (in module cam.utilities.geom_utils) circle_detail (CAM_OPTIMISATION_Properties attribute), [1] clamp_max_z() (CamPathChunk method) clamp_z() (CamPathChunk method) classes (in module cam) (in module cam.operators) (in module cam.properties) classify_segments() (GcodeModel method) cleanUp() (in module cam.testing) cleanup_bullet_collision() (in module cam.collision) cleanup_indexed() (in module cam.utilities.index_utils) clearance (CamCurveGear attribute), [1] clip_line() (Context method) clip_points() (CamPathChunk method) closed (CamPathChunk attribute) collection_name (CAM_OPERATION_Properties attribute), [1] collet_size (CAM_MACHINE_Properties attribute), [1] color (GcodeModel attribute) (Segment attribute) comment (GcodeParser attribute) compare() (in module cam.utilities.simple_utils) compare_z_level() (in module cam.utilities.compare_utils) compute_delaunay_triangulation() (in module cam.voronoi) compute_voronoi_diagram() (in module cam.voronoi) computing (CAM_CHAIN_Properties attribute), [1] (CAM_OP_REFERENCE_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] connect_chunks_low() (in module cam.cam_chunk) Context (class in cam.voronoi) contour (CamCurveHatch attribute), [1] contour_separate (CamCurveHatch attribute), [1] coords (Segment attribute) copy() (CamPathChunk method) copy_compbuf_data() (in module cam.bas_relief) copy_if_not_exists() (in module cam.utilities.addon_utils) copy_presets() (in module cam.utilities.addon_utils) coroutine (AsyncOperatorMixin attribute) count (PriorityQueue attribute) count() (CamPathChunk method) crazy_path() (in module cam.utilities.image_utils) crazy_stroke_image() (in module cam.cam_chunk) crazy_stroke_image_binary() (in module cam.cam_chunk) crazy_threshold_1 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_2 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_3 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_4 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_5 (CAM_OPERATION_Properties attribute), [1] create_base_plate() (in module cam.joinery) create_flex_side() (in module cam.joinery) create_parametric_curve() (in module cam.parametric) create_simulation_object() (in module cam.simulation) curve() (in module cam.strategy) curve_source (CAM_OPERATION_Properties attribute), [1] curve_target (CAM_OPERATION_Properties attribute), [1] curve_to_chunks() (in module cam.cam_chunk) curve_to_shapely() (in module cam.cam_chunk) curved_t() (in module cam.puzzle_joinery) cut_loops() (in module cam.utilities.loop_utils) cut_type (CAM_OPERATION_Properties attribute), [1] cutout() (in module cam.strategy) cutter_description (CAM_OPERATION_Properties attribute), [1] cutter_diameter (CAM_OPERATION_Properties attribute), [1] cutter_flutes (CAM_OPERATION_Properties attribute), [1] cutter_id (CAM_OPERATION_Properties attribute), [1] cutter_length (CAM_OPERATION_Properties attribute), [1] cutter_object_name (CAM_OPERATION_Properties attribute), [1] CUTTER_OFFSET (in module cam.constants) cutter_tip_angle (CAM_OPERATION_Properties attribute), [1] cutter_type (CAM_OPERATION_Properties attribute), [1] cylcone_diameter (CAM_OPERATION_Properties attribute), [1]

D

d (CamHypotrochoidCurve attribute), [1] d_slope_array() (in module cam.joinery) debug (Context attribute) decimate_ratio (DoBasRelief attribute), [1] dedupe_points() (CamPathChunk method) default_interface_level (CamAddonPreferences attribute), [1] default_layout (CamAddonPreferences attribute), [1] default_machine_preset (CamAddonPreferences attribute), [1] default_main_location (CamAddonPreferences attribute), [1] default_operation_location (CamAddonPreferences attribute), [1] default_shading (CamAddonPreferences attribute), [1] default_tools_location (CamAddonPreferences attribute), [1] delete() (EdgeList method) (PriorityQueue method) delete_object() (in module cam.utilities.simple_utils) DELETED (Edge attribute) deleteFirstVert() (in module cam.testing) deltax (EdgeList attribute) deltay (PriorityQueue attribute) depth (CamCurveDrawer attribute), [1] (CamPathChunkBuilder attribute) depth_exponent (DoBasRelief attribute), [1] derive_bezier_handles() (in module cam.parametric) deselect() (in module cam.utilities.simple_utils) detail_enhancement_amount (DoBasRelief attribute), [1] detail_enhancement_use (DoBasRelief attribute), [1] diameter (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveSimpleOvercuts attribute), [1] dict_cleanup() (in module cam.utilities.dict_utils) dict_remove() (in module cam.utilities.dict_utils) difference() (in module cam.utilities.simple_utils) dilate_array() (in module cam.utilities.image_utils) dip (CamHypotrochoidCurve attribute), [1] direction (CamOperationMove attribute), [1] distance (CamCurveHatch attribute), [1] (CamPackObjects attribute), [1] (Layer attribute) distance() (CamPathChunk method) (Site method) distance_2d() (in module cam.utilities.simple_utils) distance_along_paths (CAM_OPERATION_Properties attribute), [1] distance_between_paths (CAM_OPERATION_Properties attribute), [1]

distance_start() (CamPathChunk method) distributed_interlock() (in module cam.joinery) do_G1() (GcodeModel method) do_G92() (GcodeModel method) do_invert (CamCurveBoneFilletOvercuts attribute), [1] do_M163() (GcodeModel method) do_outer (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveSimpleOvercuts attribute), [1] do_simulation() (in module cam.simulation) do_simulation_feedrate (CAM_OPERATION_Properties attribute), [1] DoBasRelief (class in cam.operators) (class in cam.operators.bas_relief_ops) dont_merge (CAM_OPERATION_Properties attribute), [1] doPrint (Context attribute) double_adaptive (CamCurveMortise attribute), [1] draw() (CAM_MATERIAL_PositionObject method), [1] (CamAddonPreferences method), [1] (CamCurveDrawer method), [1] (CamCurveGear method), [1] (CamCurveHatch method), [1] (CamCurvePlate method), [1] (CamCurvePuzzle method), [1] (CamCurveRemoveDoubles method), [1] (CamOffsetSilhouete method), [1] (CamPackObjects method), [1] (CAMSimulate method), [1] (CAMSimulateChain method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] (GcodeModel method) (PathsAll method), [1] draw_interface() (in module cam.properties) (in module cam.properties.interface_props) drawer_hole_diameter (CamCurveDrawer attribute), [1] drawer_hole_offset (CamCurveDrawer attribute), [1] drawer_plate_thickness (CamCurveDrawer attribute), [1] drill() (in module cam.strategy) drill_type (CAM_OPERATION_Properties attribute), [1] DT (in module cam.constants) dump() (Edge method) (Halfedge method) (Site method) duplicate() (in module cam.utilities.simple_utils) duplicate_object() (in module cam.utilities.simple_utils) duration (CAM_INFO_Properties attribute), [1]

E

Edge (class in cam.voronoi) edge (Halfedge attribute), [1] EDGE_NUM (Edge attribute) EdgeList (class in cam.voronoi) edgenum (Edge attribute), [1] edges (Context attribute) enable_a_axis (CAM_OPERATION_Properties attribute), [1] enable_b_axis (CAM_OPERATION_Properties attribute), [1] enable_dust (CAM_OPERATION_Properties attribute), [1] enable_hold (CAM_OPERATION_Properties attribute), [1] enable_mist (CAM_OPERATION_Properties attribute), [1] ending_position (CAM_MACHINE_Properties attribute), [1] endpoints (CamPathChunkBuilder attribute) ep (Edge attribute), [1] EPS (in module cam.constants) error() (GcodeModel method) (GcodeParser method) estimate_from_model (CAM_MATERIAL_Properties attribute), [1] eval_splitting (CAM_MACHINE_Properties attribute), [1] exact_subdivide_edges (CAM_OPTIMISATION_Properties attribute), [1] execute() (AsyncOperatorMixin method) (CAM_MATERIAL_PositionObject method), [1] (CamBridgesAdd method), [1] (CamChainAdd method), [1] (CamChainOperationAdd method), [1] (CamChainOperationDown method), [1] (CamChainOperationRemove method), [1] (CamChainOperationUp method), [1] (CamChainRemove method), [1] (CamCurveBoneFilletOvercuts method), [1] (CamCurveBoolean method), [1] (CamCurveConvexHull method), [1] (CamCurveDrawer method), [1] (CamCurveFlatCone method), [1] (CamCurveGear method), [1] (CamCurveHatch method), [1] (CamCurveIntarsion method), [1] (CamCurveInterlock method), [1] (CamCurveMortise method), [1] (CamCurvePlate method), [1] (CamCurvePuzzle method), [1] (CamCurveRemoveDoubles method), [1] (CamCurveSimpleOvercuts method), [1] (CamCustomCurve method), [1] (CamHypotrochoidCurve method), [1] (CamLissajousCurve method), [1] (CamMeshGetPockets method), [1] (CamObjectSilhouette method), [1] (CamOffsetSilhouete method), [1] (CamOperationAdd method), [1] (CamOperationCopy method), [1] (CamOperationMove method), [1] (CamOperationRemove method), [1] (CamOrientationAdd method), [1] (CamPackObjects method), [1] (CamSineCurve method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] (KillPathsBackground method), [1] (PathExport method), [1] (PathExportChain method), [1] (PathsAll method), [1] (PathsBackground method), [1] (ProblemAreas method), [1] (WM_OT_gcode_import method), [1]

execute_async() (AsyncTestOperator method) (CalculatePath method), [1] (CAMSimulate method), [1] (CAMSimulateChain method), [1] (PathsChain method), [1] export_gcode_path() (in module cam.gcode_path) exportModelsToSTL() (in module cam.utilities.ocl_utils) extend() (CamPathChunk method) extend_chunks_5_axis() (in module cam.utilities.chunk_utils) extent (Context attribute) (SiteList attribute) extrudate (Layer attribute)

F

FABEX_ENGINE (class in cam) (class in cam.engine) feedrate (CAM_OPERATION_Properties attribute), [1] feedrate_default (CAM_MACHINE_Properties attribute), [1] feedrate_max (CAM_MACHINE_Properties attribute), [1] feedrate_min (CAM_MACHINE_Properties attribute), [1] filename (CAM_CHAIN_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] filename_ext (WM_OT_gcode_import attribute), [1] filter_glob (WM_OT_gcode_import attribute), [1] find_slope() (in module cam.joinery) finger() (in module cam.puzzle_joinery) finger_amount (CamCurveInterlock attribute), [1] (CamCurvePuzzle attribute), [1] finger_amount() (in module cam.joinery) finger_inset (CamCurveDrawer attribute), [1] finger_pair() (in module cam.joinery)

finger_size (CamCurveDrawer attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] finger_tolerance (CamCurveDrawer attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePuzzle attribute), [1] fingers() (in module cam.puzzle_joinery) first_down (CAM_OPERATION_Properties attribute), [1] fix_units() (in module cam.utilities.addon_utils) fixed_angle (CamCurveInterlock attribute), [1] fixed_finger() (in module cam.joinery) flex_pocket (CamCurveMortise attribute), [1] flip_x() (CamPathChunk method) format_edges_output() (in module cam.voronoi) format_polygons_output() (in module cam.voronoi) free_height (CAM_MOVEMENT_Properties attribute), [1]

G

G64 (CAM_MOVEMENT_Properties attribute), [1] G64_INCOMPATIBLE_MACHINES (in module cam.constants) gcode_header (CAM_OPERATION_Properties attribute), [1] gcode_start_dust_cmd (CAM_OPERATION_Properties attribute), [1] gcode_start_hold_cmd (CAM_OPERATION_Properties attribute), [1] gcode_start_mist_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_dust_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_hold_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_mist_cmd (CAM_OPERATION_Properties attribute), [1] gcode_trailer (CAM_OPERATION_Properties attribute), [1] GcodeModel (class in cam.gcode_import_parser) GcodeParser (class in cam.gcode_import_parser) gear() (in module cam.involute_gear) gear_iang() (in module cam.involute_gear) gear_polar() (in module cam.involute_gear) gear_q6() (in module cam.involute_gear) gear_q7() (in module cam.involute_gear) gear_type (CamCurveGear attribute), [1] gender (CamCurvePuzzle attribute), [1] generate_crosshatch() (in module cam.operators.curve_create_ops) generate_simulation_image() (in module cam.simulation) geometry_source (CAM_OPERATION_Properties attribute), [1] get_ambient() (in module cam.cam_chunk) get_bounds() (in module cam.utilities.bounds_utils) get_bounds_multiple() (in module cam.utilities.bounds_utils) get_bounds_worldspace() (in module cam.utilities.bounds_utils) get_bridges_poly() (in module cam.bridges) get_bucket() (PriorityQueue method) get_cache_path() (in module cam.utilities.simple_utils) get_chain_operations() (in module cam.utilities.operation_utils) get_change_data() (in module cam.gcode_path) get_circle() (in module cam.utilities.image_utils) get_circle_binary() (in module cam.utilities.image_utils) get_clip_edges() (Context method) get_clip_polygons() (Context method)

get_closest_chunk() (in module cam.utilities.chunk_utils) get_container() (in module cam.utilities.geom_utils) get_cutter_array() (in module cam.utilities.image_utils) get_cutter_bullet() (in module cam.collision) get_hash() (EdgeList method) get_layers() (in module cam.strategy) get_length() (CamPathChunk method) get_min_point() (PriorityQueue method) get_next_closest() (CamPathChunk method) get_object_outline() (in module cam.cam_chunk) get_object_silhouette() (in module cam.cam_chunk) get_oclSTL() (in module cam.utilities.ocl_utils) get_offset_image_cavities() (in module cam.cam_chunk) get_operation_silhouette() (in module cam.cam_chunk) get_operation_sources() (in module cam.utilities.operation_utils) get_panels() (in module cam) (in module cam.engine) get_path() (in module cam.gcode_path) get_path_3_axis() (in module cam.gcode_path) get_path_4_axis() (in module cam.gcode_path) get_path_pattern() (in module cam.pattern) get_path_pattern_4_axis() (in module cam.pattern) get_path_pattern_parallel() (in module cam.pattern) get_point() (CamPathChunk method) get_points() (CamPathChunk method) get_points_np() (CamPathChunk method) get_resolution() (in module cam.utilities.image_utils) get_sample_bullet() (in module cam.collision) get_sample_bullet_n_axis() (in module cam.collision) get_sample_image() (in module cam.utilities.image_utils) get_simulation_path() (in module cam.utilities.simple_utils) get_spline_bounds() (in module cam.utilities.bounds_utils) get_strategy_list() (in module cam.utilities.strategy_utils) get_vector_right() (in module cam.utilities.compare_utils) gradient_scaling_mask_name (DoBasRelief attribute), [1] gradient_scaling_mask_use (DoBasRelief attribute), [1]

H

Halfedge (class in cam.voronoi) hash (EdgeList attribute) (PriorityQueue attribute) hashsize (EdgeList attribute) (PriorityQueue attribute) height (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] height_mm (DoBasRelief attribute), [1] helix() (in module cam.utilities.geom_utils)

helix_diameter (CAM_MOVEMENT_Properties attribute), [1] helix_enter (CAM_MOVEMENT_Properties attribute), [1] hide_all_others (CAM_OPERATION_Properties attribute), [1] hole_diameter (CamCurveGear attribute), [1] (CamCurvePlate attribute), [1] hole_hamount (CamCurvePlate attribute), [1] hole_hdist (CamCurvePlate attribute), [1] hole_tolerance (CamCurvePlate attribute), [1] hole_vdist (CamCurvePlate attribute), [1] horizontal_finger() (in module cam.joinery) hourly_rate (CAM_MACHINE_Properties attribute), [1] hub_diameter (CamCurveGear attribute), [1]

I

idx() (in module cam.bas_relief) image_edge_search_on_line() (in module cam.cam_chunk) image_to_chunks() (in module cam.cam_chunk) image_to_numpy() (in module cam.utilities.image_utils) image_to_shapely() (in module cam.cam_chunk) imgres_limit (CAM_OPTIMISATION_Properties attribute), [1] import_gcode() (in module cam.gcode_import_parser) in_extent() (Context method) index (CAM_CHAIN_Properties attribute), [1] indexes (CamSliceObjects attribute), [1] info (CAM_OPERATION_Properties attribute), [1] insert() (CamPathChunk method) (EdgeList method) (PriorityQueue method) insideout (CAM_MOVEMENT_Properties attribute), [1] intake (CamCurveFlatCone attribute), [1] intake_skew (CamCurveFlatCone attribute), [1] intarsion_thickness (CamCurveIntarsion attribute), [1] interlock_amount (CamCurvePuzzle attribute), [1] interlock_groove() (in module cam.joinery) interlock_twist() (in module cam.joinery) interlock_twist_separator() (in module cam.joinery) interlock_type (CamCurveInterlock attribute), [1] (CamCurvePuzzle attribute), [1]

intersect() (Halfedge method) (in module cam.utilities.simple_utils) invalid_reason (CAM_CHAIN_Properties attribute), [1] inverse (CAM_OPERATION_Properties attribute), [1] invert (CamCurveSimpleOvercuts attribute), [1] invoke() (CamCurveBoneFilletOvercuts method), [1] (CamCurveBoolean method), [1] (CamCurveIntarsion method), [1] (CamCurveRemoveDoubles method), [1] (CamCurveSimpleOvercuts method), [1] (CamOffsetSilhouete method), [1] (CamPackObjects method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] is_below_z() (CamPathChunk method) is_empty() (PriorityQueue method) is_equal() (in module cam.voronoi) is_point_right_of() (Halfedge method) is_straight() (CamOffsetSilhouete method), [1] is_vertical_limit() (in module cam.utilities.simple_utils) isRelative (GcodeModel attribute) iteration (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] iterator() (SiteList method)

J

jit() (in module cam.utilities.numba_utils) join_multiple() (in module cam.utilities.simple_utils)

justify_x (DoBasRelief attribute), [1] justify_y (DoBasRelief attribute), [1] justify_z (DoBasRelief attribute), [1]

K

keep_bezier (CamCurveRemoveDoubles attribute), [1] keymap_register() (in module cam) (in module cam.utilities.addon_utils)

keymap_unregister() (in module cam) (in module cam.utilities.addon_utils) KillPathsBackground (class in cam.operators) (class in cam.operators.path_ops)

L

large_d (CamCurveFlatCone attribute), [1] laser_cmd (CAM_OPERATION_Properties attribute), [1] laser_delay (CAM_OPERATION_Properties attribute), [1] laser_off (CAM_OPERATION_Properties attribute), [1] laser_on (CAM_OPERATION_Properties attribute), [1] lasttext (threadCom attribute) Layer (class in cam.gcode_import_parser) layerIdx (Segment attribute) layers (GcodeModel attribute) layout (CAM_INTERFACE_Properties attribute), [1] LE (Edge attribute) lead_contour() (CamPathChunk method) lead_in (CAM_OPERATION_Properties attribute), [1] lead_out (CAM_OPERATION_Properties attribute), [1]

left (Halfedge attribute), [1] left_bnd() (EdgeList method) left_reg() (Halfedge method) leftend (EdgeList attribute) length (CamPathChunk attribute) level (CAM_INTERFACE_Properties attribute), [1] limit_chunks() (in module cam.cam_chunk) limit_curve (CAM_OPERATION_Properties attribute), [1] linbcg_iterations (DoBasRelief attribute), [1] line (Segment attribute) linear_bcg() (in module cam.bas_relief) lineNb (Segment attribute) lines (Context attribute) load_defaults() (in module cam.utilities.addon_utils)

M

machine_axes (CAM_OPERATION_Properties attribute), [1] main_location (CAM_INTERFACE_Properties attribute), [1] make_active() (in module cam.utilities.simple_utils) make_edge_loops() (in module cam.parametric) make_flex_pocket() (in module cam.joinery) make_variable_flex_pocket() (in module cam.joinery) make_visible() (in module cam.utilities.chunk_utils) material (CAM_OPERATION_Properties attribute), [1] max (CAM_OPERATION_Properties attribute), [1] MAX_OPERATION_TIME (in module cam.constants) max_segment_size (WM_OT_gcode_import attribute), [1] max_t (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] max_z (CAM_OPERATION_Properties attribute), [1] medial_axis() (in module cam.strategy) medial_axis_subdivision (CAM_OPERATION_Properties attribute), [1] medial_axis_threshold (CAM_OPERATION_Properties attribute), [1] merge_distance (CAM_MOVEMENT_Properties attribute), [1] (CamCurveRemoveDoubles attribute), [1] mesh_from_curve() (in module cam.utilities.chunk_utils) mesh_from_curve_to_chunk() (in module cam.cam_chunk) min (CAM_OPERATION_Properties attribute), [1] min_finger_size (CamCurveMortise attribute), [1] min_gridsize (DoBasRelief attribute), [1] min_t (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] min_z (CAM_OPERATION_Properties attribute), [1] min_z_from (CAM_OPERATION_Properties attribute), [1] minidx (PriorityQueue attribute) mirror_x() (in module cam.utilities.simple_utils) mirror_y() (in module cam.utilities.simple_utils) mitre (CamCurvePuzzle attribute), [1] mitre() (in module cam.puzzle_joinery) mitre_limit (CamOffsetSilhouete attribute), [1] modal() (AsyncOperatorMixin method) model (GcodeParser attribute) module cam cam.bas_relief cam.bridges cam.cam_chunk cam.collision cam.constants cam.engine cam.exception cam.gcode_import_parser cam.gcode_path cam.involute_gear cam.joinery cam.operators cam.operators.async_op cam.operators.bas_relief_ops cam.operators.bridges_op cam.operators.chain_ops cam.operators.curve_create_ops cam.operators.curve_equation_ops cam.operators.curve_tools_ops cam.operators.gcode_import_op cam.operators.operation_ops cam.operators.orient_op cam.operators.pack_op cam.operators.path_ops cam.operators.position_op cam.operators.preset_ops cam.operators.simulation_ops cam.operators.slice_op cam.pack cam.parametric cam.pattern cam.preferences cam.properties cam.properties.chain_props cam.properties.info_props cam.properties.interface_props cam.properties.machine_props cam.properties.material_props cam.properties.movement_props cam.properties.operation_props cam.properties.optimisation_props cam.puzzle_joinery cam.simulation cam.slice cam.strategy cam.testing cam.utilities cam.utilities.addon_utils cam.utilities.async_utils cam.utilities.bounds_utils cam.utilities.chunk_utils cam.utilities.compare_utils cam.utilities.dict_utils cam.utilities.geom_utils cam.utilities.image_utils cam.utilities.index_utils cam.utilities.loop_utils cam.utilities.machine_utils cam.utilities.material_utils cam.utilities.numba_utils cam.utilities.ocl_utils cam.utilities.operation_utils cam.utilities.orient_utils cam.utilities.shapely_utils cam.utilities.simple_utils cam.utilities.strategy_utils cam.utilities.thread_utils cam.utilities.version_utils cam.version cam.voronoi

mortise() (in module cam.joinery) move() (in module cam.utilities.simple_utils) movement (CAM_OPERATION_Properties attribute), [1] mtc_position (CAM_MACHINE_Properties attribute), [1] multiangle() (in module cam.puzzle_joinery) multiangle_gender (CamCurvePuzzle attribute), [1]

N

name (CAM_CHAIN_Properties attribute), [1] (CAM_OP_REFERENCE_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1]

next() (SiteList.Iterator method) numpy_save() (in module cam.utilities.image_utils) numpy_to_image() (in module cam.utilities.image_utils) NUMPYALG (in module cam.constants)

O

obj_from_pydata() (in module cam.gcode_import_parser) object (CAM_OPERATION_Properties attribute), [1] object_name (CAM_OPERATION_Properties attribute), [1] ocl_sample() (in module cam.utilities.ocl_utils) OCL_SCALE (in module cam.constants) oclGetWaterline() (in module cam.cam_chunk) oclResampleChunks() (in module cam.cam_chunk) oclSample() (in module cam.utilities.ocl_utils) oclSamplePoints() (in module cam.utilities.ocl_utils) oclWaterlineLayerHeights() (in module cam.utilities.ocl_utils) offset (CamCurveHatch attribute), [1] (CamOffsetSilhouete attribute), [1] (CamSineCurve attribute), [1] (GcodeModel attribute) offset_area() (in module cam.utilities.image_utils) offset_image (CAM_OPERATION_Properties attribute), [1] offset_z() (CamPathChunk method) old_rotation_a (CAM_OPERATION_Properties attribute), [1] old_rotation_b (CAM_OPERATION_Properties attribute), [1] on_blender_startup() (in module cam) (in module cam.utilities.addon_utils) on_engine_change() (in module cam) (in module cam.utilities.addon_utils) op_preset_update (CamAddonPreferences attribute), [1] open_curve() (in module cam.puzzle_joinery) open_type (CamOffsetSilhouete attribute), [1] opencamlib_version() (in module cam.utilities.version_utils) opencurve (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] operation (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] operation_limit (CAM_OPERATION_Properties attribute), [1]

operation_location (CAM_INTERFACE_Properties attribute), [1] operation_valid() (in module cam.utilities.operation_utils) operations (CAM_CHAIN_Properties attribute), [1] opname (threadCom attribute) ops_register() (in module cam) ops_unregister() (in module cam) optimisation (CAM_OPERATION_Properties attribute), [1] optimize (CAM_OPTIMISATION_Properties attribute), [1] optimize_chunk() (in module cam.utilities.chunk_utils) optimize_threshold (CAM_OPTIMISATION_Properties attribute), [1] order_points() (Context method) origin (CAM_MATERIAL_Properties attribute), [1] other_edge (CamCurveBoneFilletOvercuts attribute), [1] out_bisector() (Context method) out_edge() (Context method) out_site() (Context method) out_text (CAM_OPERATION_Properties attribute), [1] (threadCom attribute) out_triple() (Context method) out_vertex() (Context method) outlines_count (CAM_OPERATION_Properties attribute), [1] output (WM_OT_gcode_import attribute), [1] output_block_numbers (CAM_MACHINE_Properties attribute), [1] output_G43_on_tool_change (CAM_MACHINE_Properties attribute), [1] output_header (CAM_OPERATION_Properties attribute), [1] output_tool_change (CAM_MACHINE_Properties attribute), [1] output_tool_definitions (CAM_MACHINE_Properties attribute), [1] output_trailer (CAM_OPERATION_Properties attribute), [1] overcut (CamCurveDrawer attribute), [1] (CamCurvePuzzle attribute), [1] overcut_diameter (CamCurveDrawer attribute), [1] (CamCurvePuzzle attribute), [1] overlaps() (in module cam.utilities.compare_utils)

P

p (in module cam.testing) pack_curves() (in module cam.pack) parallel_angle (CAM_OPERATION_Properties attribute), [1] parallel_pocket_angle (CAM_OPERATION_Properties attribute), [1] parallel_pocket_contour (CAM_OPERATION_Properties attribute), [1] parallel_pocket_crosshatch (CAM_OPERATION_Properties attribute), [1] parallel_step_back (CAM_MOVEMENT_Properties attribute), [1] parent_child() (in module cam.utilities.chunk_utils) parent_child_distance() (in module cam.utilities.chunk_utils) parent_child_poly() (in module cam.utilities.chunk_utils) parent_path_to_object (CAM_OPERATION_Properties attribute), [1] parents (CamPathChunk attribute) parse_args() (GcodeParser method) parse_file() (GcodeParser method) parse_G0() (GcodeParser method) parse_G1() (GcodeParser method) parse_G90() (GcodeParser method) parse_G91() (GcodeParser method) parse_G92() (GcodeParser method) parse_line() (GcodeParser method) parser (GcodeModel attribute) pass_per_radius (DoBasRelief attribute), [1] path (in module cam.gcode_import_parser) path_object_name (CAM_OPERATION_Properties attribute), [1] PathExport (class in cam.operators) (class in cam.operators.path_ops) PathExportChain (class in cam.operators) (class in cam.operators.path_ops) PathsAll (class in cam.operators) (class in cam.operators.path_ops) PathsBackground (class in cam.operators) (class in cam.operators.path_ops) PathsChain (class in cam.operators) (class in cam.operators.path_ops) pencil_threshold (CAM_OPERATION_Properties attribute), [1] perimeter_cut (CamCurveIntarsion attribute), [1] period (CamSineCurve attribute), [1] period_a (CamLissajousCurve attribute), [1] period_b (CamLissajousCurve attribute), [1] period_z (CamLissajousCurve attribute), [1] pid (CAM_OPERATION_Properties attribute), [1] pixsize (CAM_OPTIMISATION_Properties attribute), [1] plasma_delay (CAM_OPERATION_Properties attribute), [1] plasma_dwell (CAM_OPERATION_Properties attribute), [1] plasma_off (CAM_OPERATION_Properties attribute), [1] plasma_on (CAM_OPERATION_Properties attribute), [1] plate_thickness (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] plate_type (CamCurvePlate attribute), [1] plunge_angle (CAM_OPERATION_Properties attribute), [1] plunge_feedrate (CAM_OPERATION_Properties attribute), [1] pm (Halfedge attribute), [1] pocket() (in module cam.strategy) pocket_option (CAM_OPERATION_Properties attribute), [1] pocket_shape (CamCurveHatch attribute), [1] pocket_to_curve (CAM_OPERATION_Properties attribute), [1] pocket_type (CAM_OPERATION_Properties attribute), [1] Point (class in cam.utilities.geom_utils) point_on_line() (in module cam.gcode_path) points (CamPathChunkBuilder attribute) pointSamplesFromOCL() (in module cam.utilities.ocl_utils) poll() (CalculatePath class method), [1] (CamBridgesAdd class method), [1] (CamChainAdd class method), [1] (CamChainOperationAdd class method), [1] (CamChainOperationDown class method), [1] (CamChainOperationRemove class method), [1] (CamChainOperationUp class method), [1] (CamChainRemove class method), [1] (CamCurveBoneFilletOvercuts class method), [1] (CamCurveBoolean class method), [1] (CamCurveConvexHull class method), [1] (CamCurveHatch class method), [1] (CamCurveIntarsion class method), [1] (CamCurveMortise class method), [1] (CamCurveRemoveDoubles class method), [1] (CamCurveSimpleOvercuts class method), [1] (CamMeshGetPockets class method), [1] (CamObjectSilhouette class method), [1] (CamOffsetSilhouete class method), [1] (CamOperationAdd class method), [1] (CamOperationCopy class method), [1] (CamOperationMove class method), [1] (CamOperationRemove class method), [1] (CamOrientationAdd class method), [1] (CAMSimulateChain class method), [1] (PathExportChain class method), [1] (PathsChain class method), [1]

poly (CamPathChunk attribute) polygon_boolean() (in module cam.cam_chunk) polygon_convex_hull() (in module cam.cam_chunk) polygons (Context attribute) pop() (CamPathChunk method) pop_min_halfedge() (PriorityQueue method) position_object() (in module cam.utilities.bounds_utils) post_processor (CAM_MACHINE_Properties attribute), [1] PRECISION (in module cam.constants) prepare_area() (in module cam.utilities.image_utils) prepare_bullet_collision() (in module cam.collision) prepare_indexed() (in module cam.utilities.index_utils) preset_defines (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_menu (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_subdir (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_values (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] pressure_angle (CamCurveGear attribute), [1] PriorityQueue (class in cam.voronoi) problem_areas() (in module cam.bas_relief) ProblemAreas (class in cam.operators) (class in cam.operators.bas_relief_ops) proc (threadCom attribute) processes (DoBasRelief attribute), [1] (ProblemAreas attribute), [1] profile_start (CAM_OPERATION_Properties attribute), [1] progress() (in module cam.utilities.simple_utils) progress_async() (in module cam.utilities.async_utils) project_curve() (in module cam.strategy) prolongate() (in module cam.bas_relief) props_register() (in module cam) props_unregister() (in module cam) protect_vertical (CAM_MOVEMENT_Properties attribute), [1] protect_vertical_limit (CAM_MOVEMENT_Properties attribute), [1] PY3 (in module cam.constants) PYTHON_BIN (in module cam.constants)

Q

qnext (Halfedge attribute)

R

R (CamHypotrochoidCurve attribute), [1] r (CamHypotrochoidCurve attribute), [1] rack() (in module cam.involute_gear) rack_height (CamCurveGear attribute), [1] rack_tooth_per_hole (CamCurveGear attribute), [1] radius (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] radius_around_model (CAM_MATERIAL_Properties attribute), [1] ramp (CAM_MOVEMENT_Properties attribute), [1] ramp_contour() (CamPathChunk method) ramp_in_angle (CAM_MOVEMENT_Properties attribute), [1] ramp_out (CAM_MOVEMENT_Properties attribute), [1] ramp_out_angle (CAM_MOVEMENT_Properties attribute), [1] ramp_zig_zag() (CamPathChunk method) RE (Edge attribute) recover_silhouettes (DoBasRelief attribute), [1] reg (Edge attribute), [1] register() (in module cam) (in module cam.operators) (in module cam.properties) relative (GcodeModel attribute) relief() (in module cam.bas_relief) ReliefError reload_paths() (in module cam.utilities.operation_utils) remove_doubles() (in module cam.utilities.simple_utils) remove_multiple() (in module cam.utilities.simple_utils)

remove_orientation_object() (in module cam.utilities.orient_utils) remove_redundant_points (CAM_OPERATION_Properties attribute), [1] rename() (in module cam.utilities.simple_utils) render_sample_image() (in module cam.utilities.image_utils) render_scene() (in module cam.bas_relief) resolution (CamCurveFlatCone attribute), [1] (CamCurvePlate attribute), [1] restore_visibility() (in module cam.utilities.chunk_utils) restrict_buffer() (in module cam.bas_relief) retract_height (CAM_MOVEMENT_Properties attribute), [1] retract_radius (CAM_MOVEMENT_Properties attribute), [1] retract_tangential (CAM_MOVEMENT_Properties attribute), [1] reverse() (CamPathChunk method) right (Halfedge attribute), [1] right_reg() (Halfedge method) rightend (EdgeList attribute) rim_size (CamCurveGear attribute), [1] rotary_axis_1 (CAM_OPERATION_Properties attribute), [1] rotary_axis_2 (CAM_OPERATION_Properties attribute), [1] rotate (CamPackObjects attribute), [1] rotate() (in module cam.utilities.simple_utils) rotate_angle (CamPackObjects attribute), [1] rotate_point_by_point() (in module cam.utilities.chunk_utils) rotation_a (CAM_OPERATION_Properties attribute), [1] rotation_b (CAM_OPERATION_Properties attribute), [1] rotation_to_2_axes() (in module cam.utilities.orient_utils) rotations (CamPathChunkBuilder attribute)

S

s_rotate() (in module cam.pack) s_sine() (in module cam.utilities.geom_utils) safe_filename() (in module cam.utilities.simple_utils) sample_chunks() (in module cam.cam_chunk) sample_chunks_n_axis() (in module cam.cam_chunk) sample_path_low() (in module cam.cam_chunk) scale_down_before (DoBasRelief attribute), [1] scale_down_before_use (DoBasRelief attribute), [1] Segment (class in cam.gcode_import_parser) segments (GcodeModel attribute) (Layer attribute) segments_to_meshdata() (in module cam.gcode_import_parser) select_multiple() (in module cam.utilities.simple_utils) set_chunks_z() (in module cam.utilities.chunk_utils) set_clip_buffer() (Context method) set_endpoint() (Edge method) set_points() (CamPathChunk method) set_relative() (GcodeModel method) set_site_number() (SiteList method) set_z() (CamPathChunk method) shading (CAM_INTERFACE_Properties attribute), [1] SHAPELY (in module cam.constants) shapely_remove_doubles() (in module cam.utilities.shapely_utils) shapely_to_chunks() (in module cam.cam_chunk) shapely_to_coordinates() (in module cam.utilities.shapely_utils) shapely_to_curve() (in module cam.utilities.shapely_utils) shapely_to_multipolygon() (in module cam.utilities.shapely_utils) shapely_version() (in module cam.utilities.version_utils) sheet_fill_direction (CamPackObjects attribute), [1] sheet_x (CamPackObjects attribute), [1] sheet_y (CamPackObjects attribute), [1] shift (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] shift() (CamPathChunk method) show_popups (CamAddonPreferences attribute), [1] show_progress() (AsyncOperatorMixin method) side_height (CamCurveMortise attribute), [1] silhouette (CAM_OPERATION_Properties attribute), [1] silhouette_exponent (DoBasRelief attribute), [1] silhouette_offset() (in module cam.cam_chunk) silhouette_scale (DoBasRelief attribute), [1] silhouette_threshold (DoBasRelief attribute), [1] sim_cutter_spot() (in module cam.simulation) simplify_tolerance (CAM_OPERATION_Properties attribute), [1] simppoly (CamPathChunk attribute) simulation_detail (CAM_OPTIMISATION_Properties attribute), [1] single_interlock() (in module cam.joinery) Site (class in cam.voronoi) SiteList (class in cam.voronoi) SiteList.Iterator (class in cam.voronoi) sitenum (Site attribute) size (CAM_MATERIAL_Properties attribute), [1] skin (CAM_OPERATION_Properties attribute), [1]

slice_3d (CamSliceObjects attribute), [1] slice_above_0 (CamSliceObjects attribute), [1] slice_detail (CAM_OPERATION_Properties attribute), [1] slice_distance (CamSliceObjects attribute), [1] slicing_2d() (in module cam.slice) slicing_3d() (in module cam.slice) slope_array() (in module cam.joinery) small_d (CamCurveFlatCone attribute), [1] smooth() (in module cam.bas_relief) smooth_iterations (DoBasRelief attribute), [1] snrm() (in module cam.bas_relief) solve_pde_multigrid() (in module cam.bas_relief) sort_chunks() (in module cam.cam_chunk) sorted (CamPathChunk attribute) source_image_crop (CAM_OPERATION_Properties attribute), [1] source_image_crop_end_x (CAM_OPERATION_Properties attribute), [1] source_image_crop_end_y (CAM_OPERATION_Properties attribute), [1] source_image_crop_start_x (CAM_OPERATION_Properties attribute), [1] source_image_crop_start_y (CAM_OPERATION_Properties attribute), [1] source_image_name (CAM_OPERATION_Properties attribute), [1] (DoBasRelief attribute), [1] source_image_offset (CAM_OPERATION_Properties attribute), [1] source_image_scale_z (CAM_OPERATION_Properties attribute), [1] source_image_size_x (CAM_OPERATION_Properties attribute), [1] source_image_size_y (CAM_OPERATION_Properties attribute), [1] source_valid() (in module cam.utilities.operation_utils) spindle_default (CAM_MACHINE_Properties attribute), [1] spindle_max (CAM_MACHINE_Properties attribute), [1] spindle_min (CAM_MACHINE_Properties attribute), [1] spindle_rotation (CAM_MOVEMENT_Properties attribute), [1] spindle_rpm (CAM_OPERATION_Properties attribute), [1] spindle_start_time (CAM_MACHINE_Properties attribute), [1] split_layers (WM_OT_gcode_import attribute), [1] split_limit (CAM_MACHINE_Properties attribute), [1] spoke_amount (CamCurveGear attribute), [1] start_block_number (CAM_MACHINE_Properties attribute), [1] start_type (CAM_OPERATION_Properties attribute), [1] starting_position (CAM_MACHINE_Properties attribute), [1] startpoints (CamPathChunkBuilder attribute) stay_low (CAM_MOVEMENT_Properties attribute), [1] stem_size (CamCurvePuzzle attribute), [1] stepdown (CAM_OPERATION_Properties attribute), [1] straight (CAM_OPERATION_Properties attribute), [1] (CamCurveHatch attribute), [1] strategy (CAM_OPERATION_Properties attribute), [1] strategy_4_axis (CAM_OPERATION_Properties attribute), [1] strategy_5_axis (CAM_OPERATION_Properties attribute), [1] style (CamCurveBoneFilletOvercuts attribute), [1] (CamOffsetSilhouete attribute), [1] (Segment attribute) subdivide (WM_OT_gcode_import attribute), [1] subdivide() (GcodeModel method) subdivide_long_edges() (in module cam.collision) subdivide_short_lines() (in module cam.utilities.simple_utils)

T

t() (in module cam.puzzle_joinery) tab (CamCurveFlatCone attribute), [1] tangent_angle (CamCurveInterlock attribute), [1] test_stroke() (in module cam.utilities.image_utils) test_stroke_binary() (in module cam.utilities.image_utils) testAll() (in module cam.testing) testCalc() (in module cam.testing) testCutout() (in module cam.testing) testOperation() (in module cam.testing) testParallel() (in module cam.testing) testPocket() (in module cam.testing) tests (in module cam.testing) testSimulation() (in module cam.testing) testWaterline() (in module cam.testing) thickness_mm (DoBasRelief attribute), [1] thread_read() (in module cam.utilities.thread_utils) threadCom (class in cam.utilities.thread_utils) threshold (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamMeshGetPockets attribute), [1] tick() (AsyncOperatorMixin method) tile() (in module cam.puzzle_joinery) tile_x_amount (CamCurvePuzzle attribute), [1] tile_y_amount (CamCurvePuzzle attribute), [1] timer (AsyncOperatorMixin attribute) timer_update() (in module cam) (in module cam.utilities.thread_utils) timing_add() (in module cam.utilities.simple_utils) timing_init() (in module cam.utilities.simple_utils) timing_print() (in module cam.utilities.simple_utils) timing_start() (in module cam.utilities.simple_utils) to_chunk() (CamPathChunkBuilder method) tolerance (CamCurveIntarsion attribute), [1] (CamPackObjects attribute), [1]

TOLERANCE (in module cam.constants) tonemap() (in module cam.bas_relief) toolnumber (GcodeModel attribute) (Segment attribute) tools_location (CAM_INTERFACE_Properties attribute), [1] tooth_amount (CamCurveGear attribute), [1] tooth_spacing (CamCurveGear attribute), [1] top_bottom (CamCurveMortise attribute), [1] triangle() (in module cam.utilities.geom_utils) triangles (Context attribute) triangulate (Context attribute) tuple_add() (in module cam.utilities.simple_utils) tuple_length() (in module cam.utilities.simple_utils) tuple_multiply() (in module cam.utilities.simple_utils) tuple_subtract() (in module cam.utilities.simple_utils) twist_female() (in module cam.puzzle_joinery) twist_keep (CamCurvePuzzle attribute), [1] twist_line (CamCurvePuzzle attribute), [1] twist_line() (in module cam.joinery) twist_line_amount (CamCurvePuzzle attribute), [1] twist_lock (CamCurvePuzzle attribute), [1] twist_male() (in module cam.puzzle_joinery) twist_percent (CamCurvePuzzle attribute), [1] twist_separator (CamCurvePuzzle attribute), [1] twist_separator_amount (CamCurvePuzzle attribute), [1] twist_separator_edge_distance (CamCurvePuzzle attribute), [1] twist_separator_slot() (in module cam.joinery) twist_separator_spacing (CamCurvePuzzle attribute), [1] twist_thick (CamCurvePuzzle attribute), [1] type (CAM_MOVEMENT_Properties attribute), [1] (Segment attribute) typecurve (CamHypotrochoidCurve attribute), [1]

U

union() (in module cam.utilities.simple_utils) unique() (in module cam.utilities.compare_utils) unit_value_to_string() (in module cam.utilities.simple_utils) unregister() (in module cam) (in module cam.operators) (in module cam.properties) update_ambient_tag (CAM_OPERATION_Properties attribute), [1] update_bridges() (in module cam.utilities.operation_utils) update_bullet_collision_tag (CAM_OPERATION_Properties attribute), [1] update_chipload() (in module cam.utilities.operation_utils) update_cutout() (in module cam.utilities.strategy_utils) update_exact() (in module cam.utilities.strategy_utils) update_exact_mode() (in module cam.utilities.strategy_utils) update_image_size_y() (in module cam.utilities.operation_utils) update_interface() (in module cam.properties.interface_props) update_layout() (in module cam.properties.interface_props) update_machine() (in module cam.utilities.machine_utils) update_material() (in module cam.utilities.material_utils) update_offset_image() (in module cam.utilities.operation_utils) update_offset_image_tag (CAM_OPERATION_Properties attribute), [1] update_opencamlib() (in module cam.utilities.strategy_utils) update_opencamlib_1() (in module cam.utilities.strategy_utils) update_operation() (in module cam.properties) (in module cam.utilities.operation_utils), [1] update_operation_valid() (in module cam.utilities.operation_utils)

update_poly() (CamPathChunk method) update_rest() (in module cam.utilities.operation_utils) update_rotation() (in module cam.utilities.operation_utils) update_shading() (in module cam.properties.interface_props) update_silhouette_tag (CAM_OPERATION_Properties attribute), [1] update_strategy() (in module cam.utilities.strategy_utils) update_user_layout() (in module cam.properties.interface_props) update_Z_buffer_image() (in module cam.utilities.operation_utils) update_z_buffer_image_tag (CAM_OPERATION_Properties attribute), [1] update_zbuffer_image() (in module cam.utilities.operation_utils) use_bridge_modifiers (CAM_OPERATION_Properties attribute), [1] use_bridges (CAM_OPERATION_Properties attribute), [1] use_bridges() (in module cam.bridges) use_exact (CAM_OPTIMISATION_Properties attribute), [1] use_image_source (DoBasRelief attribute), [1] use_layers (CAM_OPERATION_Properties attribute), [1] use_limit_curve (CAM_OPERATION_Properties attribute), [1] use_modifiers (CAM_OPERATION_Properties attribute), [1] use_opencamlib (CAM_OPTIMISATION_Properties attribute), [1] use_planar (DoBasRelief attribute), [1] use_position_definitions (CAM_MACHINE_Properties attribute), [1] USE_PROFILER (in module cam.constants) useG64 (CAM_MOVEMENT_Properties attribute), [1] user_main_location (CamAddonPreferences attribute), [1] user_operation_location (CamAddonPreferences attribute), [1] user_tools_location (CamAddonPreferences attribute), [1]

V

valid (CAM_CHAIN_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] variable_finger() (in module cam.joinery) vcycle_iterations (DoBasRelief attribute), [1] vert() (in module cam.bas_relief)

vertex (Halfedge attribute), [1] vertical_finger() (in module cam.joinery) vertices (Context attribute) view_layer_name (DoBasRelief attribute), [1] voronoi() (in module cam.voronoi)

W

warn() (GcodeModel method) (GcodeParser method) warnings (CAM_INFO_Properties attribute), [1] was_hidden_dict (in module cam.constants) waterline_fill (CAM_OPERATION_Properties attribute), [1] waterline_project (CAM_OPERATION_Properties attribute), [1] wave (CamSineCurve attribute), [1] wave_a (CamLissajousCurve attribute), [1] wave_amount (CamSineCurve attribute), [1]

wave_angle_offset (CamSineCurve attribute), [1] wave_b (CamLissajousCurve attribute), [1] wave_distance (CamSineCurve attribute), [1] width (CamCurveDrawer attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] width_mm (DoBasRelief attribute), [1] WM_OT_gcode_import (class in cam.operators) (class in cam.operators.gcode_import_op) working_area (CAM_MACHINE_Properties attribute), [1]

X

x (Site attribute) x_string (CamCustomCurve attribute), [1] x_y_distance_to() (CamPathChunk method) x_y_distance_within() (CamPathChunk method)

xhatch (CamCurveHatch attribute), [1] xmax (SiteList attribute) xmin (EdgeList attribute) (SiteList attribute)

Y

y (Site attribute) y_string (CamCustomCurve attribute), [1] ymax (SiteList attribute)

ymin (PriorityQueue attribute) (SiteList attribute) ystar (Halfedge attribute), [1]

Z

Z (Layer attribute) z_limit (CamMeshGetPockets attribute), [1] z_position (CAM_MATERIAL_Properties attribute), [1] z_string (CamCustomCurve attribute), [1]

zbuffer_image (CAM_OPERATION_Properties attribute), [1] zend (CamPathChunk attribute) zig_zag_ramp (CAM_MOVEMENT_Properties attribute), [1] zstart (CamPathChunk attribute)